Crealies - Anemone Flower Card

Hello Everyone,

I'm stopping by to share this Anemone Flower Birthday card using Crealies latest release. Over to my card..

To make this card, I took Black card base and I've used Crealies Arch shaped ATC dies to create the tone on tone background to add interest.

Meanwhile, I die cut this big Anemone Flower on White card base which I ink blended using Distress Oxides. After that, I die cut the outline of this flower on white card stock and glued it to the ink blended flower base. I adhered this flower on the Black Card base using foam tape to give it some dimension.

Then, I die cut the leaves on Golden Mirror card stock and adhered around the Big Anemone Flower. I also added the die cut sentiment on same mirror gold card stock and adhered it to the card panel.

Finally, I added rain drops embellishment and some Gold sequins to complete this beautiful Flower Birthday card.

I hope you get inspired. Thank you so much for stopping by!

Hugsxx

Deepti Aggarwal

  

I have used following Crealies products:

Crealies Dies / Stansen: 

X-tra no. 81

Inside or Out no. 103

Duo Dies no. 64

Text Dies no. 104

 

Playing along with:

Simon Says Wednesday Challenge - Anything Goes

Word Art Wednesday Anything Goes - Weeks #641-642

Cut it Up Challenge #300 ~ Happy Birthday!

Time Out Challenge #260 - Striped

Hello Everyone,

I'm stopping by to share my DT post for Time Out current challenge #260 where the theme is "Striped". And I have made this fun Shaker card using one of the image from my already stamped images stash.. yeah.. I do have a stash of lots of stamped images.. I really wonder it's just me or do you also have such kind of a stash??? Do let me know in the comment section below 😜..

Over to my card..

Our generous Sponsor is Lawn fawn

Prize: $25 Store Credit

To make this card, as mentioned above, I have used this already stamped image from my stash.  This was stamped using Maker Forte Martini Builder stamp set and to add more fun, I fussy cut the  glass from the middle to create shaker card. I layered this panel with acetate from the back and added these cute embellishments along with foam tape. Then, I adhered it to the same sized White panel (this really helps me to align it properly 😊). 

Meanwhile, I took matching A2 size Card base and  created tone on tone striped background using same color Distress Oxide. Then, I adhered the shaker panel on this striped card base. 

Finally, I added some embellishments at the top panel to complete this fun shaker Birthday card.

I hope you get inspired and will join this challenge#260 at Time Out. This challenge is sponsored by Lawn fawn and  the Challenge winner will receive a $25.00 gift voucher to spend on their shop.

I can't wait to see what you create.

Thank you so much for stopping by!!

Hugsxx
Deepti Aggarwal

Crealies - Cute Magnetic Bookmarks

Hello Everyone,

I'm stopping by to share these cute Bookmarks using Crealies latest Partzz dies. It was so much fun making these cuties for my girls. 

To make these Bookmarks, I have used the Pattern Paper from my stash. For the cloud one, |I took rainbow striped Pattern Paper, cut it in to roughly 1 by 4 inches strip, folded it into half and then added these cute Die cut clouds at both the ends. Then, I glued the magnetic strip inside to complete it.

For these Rainbow shaped bookmarks, I took White card base and folded it in to half. Then, I die cut it out using Crealies Outer edges of rainbow dies leaving the folded edges intact.

Meanwhile, I die cut out these rainbow 4 times in 4 different colored Pattern paper and adhered these on the folded die cut out Rainbow shape. Finally, I added the magnetic strip inside to complete these cute magnetic bookmarks. 

 I hope you get inspired. 

Thank you so much for stopping by!

Hugsxx

Deepti Aggarwal

  

I have used following Crealies products:

Crealies Dies / Stansen: 

Partzz no. 77

Partzz no. 78

  

Playing along with:

Word Art Wednesday -Anything Goes - Weeks #639-640

Die Cut Divas March Challenge - Anything goes

NBUS Challenge #60 - these are my new dies, using it for the first time

Time Out Challenge #259 - Spread your Wings!!

Hello Everyone,

I'm stopping by to share my DT post for Time Out current challenge #259 where the challenge theme is "Birds of a Feather". 

Our new challenge is a special collaboration challenge with Just Us Girls Challenge Blog! By entering the linky tool you will automatically also join Just Us Girls Challenge. Isn't this awesome 😁? You will double your chances to be chosen as a design team favorite and your project may be showcased in one of the challenge blogs. Whether you join from Time Out or from Just Us Girls, you also have a chance to win $25.00 store credit to Waffle Flower Crafts. 

Before linking, please make sure to head on over to Just Us Girls Challenge blog to check out their DT inspiration. And do add a comment saying you are coming from Time Out! 

This is what I've created for this challenge..

Our generous Sponsor is Waffle Flower Crafts. 

Prize: $25 Store Credit

To make this card, I've used Funky Fossil Designs - Peacock Stencil. Finally, I've opened the seal of this stencil which I was hoarding from couple of years 😁.. I think my fellow crafters can understand the feeling of using a "NEVER USED" craft supplies. I am so excited..😍. and I am really happy how this one layer card turned out. 

I started with A2 size White card base and stenciled it with Peacock using Rainbow colored Distress inks. And then to create a drama around the peacock, I splattered it with same Distress ink colors. I also splattered it with Gold Acrylic paint to further elevate the look. I hope, I haven't gone overboard with splattering. 

Once satisfied with all the splattering, I stamped the sentiment from  STAMPlorations - Trendy Birds 2  stamp set to complete this one layer card.

I hope you get inspired and will join this challenge#259 at Time Out. This challenge is sponsored by Waffle Flower Crafts.  and  the Challenge winner will receive a $25.00 gift voucher to spend on their shop.

I can't wait to see what you create.

Thank you so much for stopping by!!

Hugsxx
Deepti Aggarwal

Playing along with:

AAA Colourful -Colourboard #1

Simon Says Wednesday Challenge - A bit o' Green

Simon Says Monday Challenge - A bit o' Green

March 2024 Stencil Fun Challenge - Anything goes option

Triple B March 2024 Challenge - Anything goes with Birds, blooms or butterflies

Crealies - 3D Heart Hot Air Balloon

Hello Everyone,

I'm stopping by to share this cute 3D Heart Hot Air Balloon with a basket which can be used for putting small gift. I've used Crealies latest Heart dies to make it. Normally, I don't make 3D projects and this was my first attempt and I really love how it turned out. I hope you like it too.

Over to this cute heart Hot Air Balloon :)

To make this Heart Hot Air Balloon, I've used Crealies Heart dies and die cut out the hearts 8 times on Pink Pattern Paper, folded it in to half which was already marked in the dies and adhered these together using glue to make the Heart Hot Air Balloon. 

Then, I made the the small Basket using Crealies Create a box dies where I have used the base from the dies and added the four sides to make to basket. After that, I die cut out the Banner on Glitter Copper Paper and adhered it around the basket to decorate it.

To join the Heart Hot Air Balloon and the basket together, I cut four strips on thick cardboard which I first glued inside the basket then to the Heart Ballon to complete this 3D Heart Hot Air Balloon.

This basket is perfect for adding small gifts. I made this heart Hot Air Balloon gift for my Daughter and I'm planning to add some beautiful piece of Jewellery in the basket.

I hope you get inspired. Thank you so much for stopping by!

Hugsxx

Deepti Aggarwal

  

I have used following Crealies products:

Crealies Dies / Stansen: 

Varia dies no. 12

Create a box mini. no. 18

X-tra no. 63

 

Crealies - Arch Shaped Gatefold Butterfly Card

Hello Everyone,

I'm stopping by to share this Arch shaped Gatefold Butterfly card using Crealies latest dies. Over to my card..

Here is the reel, I created for this card..

To make this card, I first took White Card stock and created the base using Crealies Arch shaped dies. Then, I layered this White base with three different pattern paper from same paper pad both outside and inside of the card using the layers from same die set.

Meanwhile, I die cut out a silhouette Butterfly using Crealies Butterfly dies on the same set of pattern paper and layered it with another layer with detailed wings. 

Then, I added the butterfly body which I die cut on on Black card stock and finally added some gemstones to complete the look of this beautiful butterfly. 

After that, I added a small hinge on one side of the gatefold and glued the butterfly with an angle. With this hinge, it gave the impression that Butterfly is sitting on the edge of the gatefold. 

I added die cut out sentiment to complete this card. I really love how this card turned out with this butterfly sitting on the edge. 

I hope you get inspired. Thank you so much for stopping by!

Hugsxx

Deepti Aggarwal

  

I have used following Crealies products:

Crealies Dies / Stansen: 

Cardzz no. 572

Varia no. 03

Text Dies no. 8

  

Playing Along with:

Simon Says Wednesday Challenge - Anything goes

Word Art Wednesday -Anything Goes - Weeks #637-638

Die Cut Divas March Challenge

Allsorts Challenges - Week 770 - Spring